The State Administration for Market Regulation has released implementation rules for national supervision spot checks on the quality of four types of lighting-related products

Recently, the website of the State Administration for Market Regulation published the 'Announcement of the State Administration for Market Regulation on the Release of Implementation Rules for National Supervision Spot Checks on the Quality of 131Types of Products (Click here for details: State Administration for Market Regulation Official Website). The announcement states that to further standardize the work of national supervision spot checks on product quality and create an open, transparent, fair, and just regulatory environment, in accordance with the 'Interim Measures for the Management of Product Quality Supervision Spot Checks', the State Administration for Market Regulation has compiled the 'Implementation Rules for National Supervision Spot Checks on the Quality of 131Types of Products', which is now released. Local supervision spot check work may refer to these rules for execution.

Among them, several lighting-related products are involved, including fixed general-purpose Luminaire products, self-ballasted LED lamp products, LED control device products, explosion-proof Luminaire products, etc.. Manufacturers of related products must ensure product quality in accordance with relevant standards and strengthen their efforts to improve product quality.

Fixed General-Purpose Luminaire Products National Supervision Spot Check Implementation Rules

1 Sampling Method

Samples are drawn from products awaiting sale by producers or sellers using a random sampling method.

Random numbers can generally be generated using methods such as random number tables.

For each batch of products, 3 units are sampled; among them, 2 units serve as test samples, and 1 unit serves as a backup sample.

2 Basis for Inspection

Products implementing enterprise standards, group standards, or local standards shall have their inspection items carried out in reference to the above content.

Documents with dated references: all subsequent amendments (excluding errata) or revised editions do not apply to these rules. For documents without dated references, the latest version applies to these rules.

3 Judgment Rules

3.1Basis Standards

GB 7000.1-2015 Luminaire Part 1: General Requirements and Tests

GB 7000.201-2008 Luminaire Part 2-1: Special Requirements for Fixed General Purpose Luminaires

GB/T 17743-2007 Limits and methods of measurement for radio disturbance characteristics of electrical lighting and similar equipment

GB/T 17743-2017 Limits and methods of measurement for radio disturbance characteristics of electrical lighting and similar equipment

GB 17625.1-2012 Electromagnetic compatibility (EMC) Limits Harmonic current emission limits (device input current per phase ≤16A)

Current valid enterprise standards, group standards, local standards, and product-expressed quality requirements

3.2Judgment principles

After inspection, if all inspected items pass, the sampled products are judged as qualified; if any one or more inspected items fail, the sampled products are judged as unqualified.

If the quality requirements explicitly stated by the inspected product are higher than the standard requirements for inspection items in these rules, judgment shall be made based on the explicitly stated quality requirements of the inspected product.

If the quality requirements explicitly stated by the inspected product are lower than the mandatory standard requirements for inspection items in these rules, judgment shall be made based on the mandatory standard requirements.

If the quality requirements explicitly stated by the inspected product are lower than or included in the recommended standard requirements for inspection items in these rules, judgment shall be made based on the explicitly stated quality requirements of the inspected product.

If the quality requirements explicitly stated by the inspected product lack the mandatory standard requirements for inspection items in these rules, judgment shall be made based on the mandatory standard requirements.

If the quality requirements explicitly stated by the inspected product lack the recommended standard requirements for inspection items in these rules, that item shall not participate in the judgment.

National Supervision and Spot Check Implementation Rules for Self-ballasted LEDLamp Products Quality

1 Sampling Method

Samples are drawn from the products available for sale by producers or sellers under inspection using a random sampling method.

Random numbers can generally be generated using methods such as random number tables.

For each batch of products, 3 samples are drawn, of which 2 serve as test samples, and 1 serve as reserve samples.

2 Inspection Basis

Products implementing enterprise standards, group standards, or local standards shall have their inspection items carried out with reference to the above content.

Documents with a specified date: all subsequent amendment sheets (excluding errata) or revised editions do not apply to these rules. Documents without a specified date: the latest version applies to these rules.

3 Judgment Rules

3.1 Based on Standards

GB 24906-2010 General lighting 50Vand above self-ballasted LEDlamps Safety requirements

GB 17625.1-2012 Electromagnetic Compatibility Limits Harmonic Current Emission Limits (Device per-phase input current ≤16A)

Current valid enterprise standards, group standards, local standards, and product-expressed quality requirements

3.2Judgment Principles

After inspection, if all inspected items pass, the sampled product is judged as qualified; if any one or more inspected items fail, the sampled product is judged as unqualified.

If the quality requirements explicitly stated by the inspected product are higher than the standard requirements on which the inspection items in this specification are based, judgment shall be made according to the quality requirements explicitly stated by the inspected product.

If the quality requirements explicitly stated by the inspected product are lower than the mandatory standard requirements on which the inspection items in these rules are based, judgment shall be made in accordance with the mandatory standard requirements.

If the quality requirements explicitly stated by the inspected product are lower than or include the recommended standard requirements on which the inspection items in these rules are based, judgment shall be made in accordance with the quality requirements explicitly stated by the inspected product.

If the quality requirements explicitly stated by the inspected product lack the mandatory standard requirements on which the inspection items in these rules are based, judgment shall be made in accordance with the mandatory standard requirements.

If the quality requirements explicitly stated by the inspected product lack the recommended standard requirements on which the inspection items in these rules are based, that item shall not participate in the judgment.

LEDControl Device Product Quality National Supervision Spot Check Implementation Rules

1 Sampling Method

Samples are drawn from products available for sale by producers and sellers selected through random sampling.

Random numbers can generally be generated using methods such as random number tables.

For each batch of products, 3 units are sampled, of which 2 units serve as test samples, and 1 unit serves as a backup sample.

2 Basis for Inspection

Products implementing enterprise standards, group standards, or local standards shall have their inspection items carried out with reference to the above content.

For documents with a specified date, all subsequent amendment sheets (excluding corrections) or revised editions do not apply to these rules. For documents without a specified date, the latest version applies to these rules.

3 Judgment Rules

3.1Based on Standards

GB 19510.1-2009 Control gear for lamps - Part 1: General requirements and safety requirements

GB 19510.14-2009 Control gear for lamps - Part 14: Special requirements for DC or AC electronic control gear for LED modules

Current valid enterprise standards, group standards, local standards, and product declared quality requirements

3.2 Principles of determination

If all inspected items pass the inspection, the sampled products are deemed qualified; if any one or more items fail the inspection, the sampled products are deemed unqualified.

If the quality requirements explicitly stated by the inspected product are higher than the standard requirements for inspection items in these rules, judgment shall be made based on the quality requirements explicitly stated by the inspected product.

If the quality requirements explicitly stated by the inspected product are lower than the mandatory standard requirements for inspection items in these rules, judgment shall be made based on the mandatory standard requirements.

If the quality requirements explicitly stated by the inspected product are lower than or included in the recommended standard requirements for inspection items in these rules, judgment shall be made based on the quality requirements explicitly stated by the inspected product.

If the quality requirements explicitly stated by the inspected product lack the mandatory standard requirements for inspection items in these rules, judgment shall be made based on the mandatory standard requirements.

If the quality requirements explicitly stated by the inspected product lack the recommended standard requirements for inspection items in these rules, this item shall not participate in the judgment.

Implementation Rules for National Supervisory Spot Checks on Explosion-Proof Luminaire Product Quality

1 Sampling Method

Samples are drawn from products available for sale by the sampled producers or sellers using a random sampling method.

Random numbers can generally be generated using methods such as random number tables.

For each batch of products, 2 units are sampled; among them, 1 unit serves as the inspection sample, and 1 unit serves as the reserve sample.

2 Inspection Basis

Products implementing enterprise standards, group standards, or local standards shall have their inspection items carried out with reference to the above content.

For documents with a specified date, all subsequent amendment sheets (excluding corrections) or revised editions do not apply to these rules. For documents without a specified date, the latest version applies to these rules.

3 Judgment Rules

3.1Based on Standards

GB 3836.1-2010 Explosive atmospheres Part1: Equipment General requirements

GB 3836.2-2010 Explosive atmospheres Part 2: Equipment protected by flameproof enclosures "d"

GB 3836.3-2010 Explosive atmospheres Part 3: Equipment protected by increased safety "e"

Current valid enterprise standards, group standards, local standards, and product explicit quality requirements

3.2Principles of determination

After inspection, if all inspection items pass, the sampled product is judged as qualified; if any one or more inspection items fail, the sampled product is judged as unqualified.

If the quality requirements explicitly stated by the inspected product are higher than the standard requirements for inspection items in these rules, judgment shall be made based on the quality requirements explicitly stated by the inspected product.

If the quality requirements explicitly stated by the inspected product are lower than the mandatory standard requirements for inspection items in these rules, judgment shall be made based on the mandatory standard requirements.

If the quality requirements explicitly stated by the inspected product are lower than or included in the recommended standard requirements for inspection items in these rules, judgment shall be made based on the quality requirements explicitly stated by the inspected product.

If the quality requirements explicitly stated by the inspected product lack the mandatory standard requirements for inspection items in these rules, judgment shall be made based on the mandatory standard requirements.

If the quality requirements explicitly stated by the inspected product lack the recommended standard requirements for inspection items in these rules, that item shall not participate in the judgment.